【摘 要】
：
对于提高晶硅太阳能组件长期可靠性而言，封装膜起着非常关键的作用，包括通过提高更好的环境保护以及电绝缘性能。最近几年来，聚烯烃封装膜被开发用来替代EVA封装膜。相对于EVA而言，聚烯烃弹性体可以消除黄变，放酸以及提供更佳的电性能。本报告将详细讨论封装材料对组件长期可靠性的影响以及聚烯烃封装膜的优势。
【出 处】
：
SNEC 第十届(2016)国际太阳能产业及光伏工程(上海)论坛
论文部分内容阅读
对于提高晶硅太阳能组件长期可靠性而言，封装膜起着非常关键的作用，包括通过提高更好的环境保护以及电绝缘性能。最近几年来，聚烯烃封装膜被开发用来替代EVA封装膜。相对于EVA而言，聚烯烃弹性体可以消除黄变，放酸以及提供更佳的电性能。本报告将详细讨论封装材料对组件长期可靠性的影响以及聚烯烃封装膜的优势。
其他文献
The a-Si/c-Si Heterojunction Technology (HJT) or Heterojunction with intrinsic thin layer (HIT) solar cell have been studied on the surfaces passivation and a-Si/c-Si heterojunction,transparent conduc
Electrical capacitance which forms between the solar cells and the grounded frame of solar modules due to the module layout is an undesirable effect and thus termed parasitic capacitance.This parasiti
Electrically conductive adhesive (ECA) materials have been widely used in electronics because of their low curing temperatures resulting in low thermal stresses and their ROHS-compliance.These charact
CIGS is the most advanced and the most efficient production method for thin film solar modules.Modules with CIGS (Cu(In,Ga)(Se,S)2) absorbers are effective in converting light directly into electricit
目前太阳能组件中有大约15％的空白面积太阳光没有被太阳能电池有效地吸收.这部分被浪费的光可以通过在组件内部使用折光膜重新引导到电池上面.这篇文章我们会介绍折光的原理及其应用于光伏焊带上面的测试结果.该技术一般可提升组件相对效率1.5％-2.5％，并得到了大量的试验结果验证.折光膜只需要在焊接机上面添加一个贴膜模块就可以实现量产，与现有组件工艺有非常好的兼容性.同时，量产数据显示插入贴膜步骤后组件生
The durability of photovoltaic modules is a key consideration in assessing the expected energy output of a solar PV installation.To assure consistent output over service lifetimes of greater than 25 y
DuPont has a deep interest in long-term module reliability in relation to our products for the solar market.We have several thrusts to study the interactions of photovoltaic module component materials
本文主要评估一批在广州户外运行10年的双玻璃多晶硅组件,广州属亚湿热气候,是评估双玻璃组件可靠性的典型气候环境之一.该批组件共计20块,容量为2.1Kwp,2007年8月安装于广州大学城,并网发电至今.文章通过观察组件外观的变化以及持续跟踪系统的发电性能来评估双玻璃组件技术在亚湿热地区的可靠性,为行业技术选择提供参考.
In this article,Enlitech performs the spectral response of commercial PV module directly with large monochromatic beam.It is more convenient than traditional way which does not prepare specific sample
Many countries around the world (including China) are moving towards distributed PV installations,in addition to,or even avoiding,large-scale ground mounted systems.This is mainly for two reasons:(i)