【摘 要】
：
Residual fatigue strength of 48MnV crankshaft was studied and analyzed based on safety factor. Three different status crankshafts were used to the hop-up tests,
【机 构】
：
School of Mechanical and Power Engineering
论文部分内容阅读
Residual fatigue strength of 48MnV crankshaft was studied and analyzed based on safety factor. Three different status crankshafts were used to the hop-up tests, which maintain new after 500 h hop-up tests and after 1 000 h hop-up tests. Then, crankshafts were cut into unit cranks. The unit cranks were used to do endurance bending tests to get the residual fatigue strength. Finally, the results were analyzed based on safety factor. The results show that safety factor of crankshaft descends a little with the increase of the running time, and the residual safety factor is still much bigger than the endurable safety factor. Furthermore, after the crankshaft accomplishes a full life cycle, the residual fatigue strength of the crankshaft is enough to remanufacture and fulfill the next life cycle.
其他文献
Nano-SiO2 particles strengthened Ni-based composite coating was designed and prepared on steel substrate. The structures and nanoparticle content of the nano-Si
A 20 vol.% SiCp/Al composite was fabricated by squeeze casting, of which a new process for fabricating the preform was used by blending Al powder and SiC partic
The life cycle index of remanufactured engines was assessed by using the method of life cycle assessment (LCA). A remanufactured engine of a certain domestic br
Under the condition of equal flow, the maximum and minimum theoretical values of gap size were studied and an estimation equation was established for the clad e
The deformation behavior and the contact area of conductive particles in anisotropically conductive adhesives (ACA) were investigated by finite element method (
The fuzzy C-means clustering algorithm(FCM) to the fuzzy kernel C-means clustering algorithm(FKCM) to effectively perform cluster analysis on the diversiform st
A parametric model of cutting temperature generated in end milling process is developed according to the thermal mechanism of end milling as an intermittent ope
New method for handling roof of the base successive mining is proposed, which is induction caving in the roof. The key is that it is made certain to the station
A kind of complex additive mainly containing Al, Mg, F, and O was prepared. The synthetical performances of the property-modified prebaked anodes containing add
选择Gaussian 98大型计算化学软件包,设计了两组具有代表性的测试算例,在多种个人计算机和工作站硬件、系统软件平台上进行计算性能的综合测试、分析和评价.指出目前高端PC机