我厂现有国产卧式压铸机6台,型号为J1113A和J1125B。月生产压铸零件30余t,品种多达20余种。其中有些设备根据生产需求,频繁地更换压铸模具。安装压铸模具时,往往要靠人的视觉和感觉来调整模具的位置,比较麻烦。特别是模具的浇口部位在安装时要对准压室外径,否则,相差一点都有可能挤坏模具座板的浇口。压铸型的浇口部位一旦挤塌,模具与 Our existing domestic horizontal die-casting machine 6, model J1113A and J1125B. Production of more than 30 pieces of casting t, up to more than 20 varieties. Some of these machines frequently change die-casting molds according to production needs. Die-casting mold installation, often rely on people’s vision and feel to adjust the position of the mold, more trouble. In particular, the gate part of the mold should be aligned with the outer diameter of the pressure chamber during installation. Otherwise, the gate of the mold base may be squeezed out by a little difference. Die-casting part of the gate once the collapse, mold and