论文部分内容阅读
土无心磨床导轮的修整,一般采用金钢钻。由于金钢钻价格昂贵,供应也较紧张。因此有必要寻找一种经济的方法来代替。本文特向大家介绍一种不用金钢钻,而采用磨削轮来修整导轮的方法。这种方法不仅经济适用,而且可以得到较高的精度。一、纵进给无心磨削的导轮对这种加工方法用的无心麽床导轮的修整,与磨削零件时相同,导轮仍斜置成a角。在修整导轮前,先用金钢石将砂轮修整好,然后横向切入导轮面,每次进刀为0.02毫米。
Earth centerless grinding wheel guide wheel dressing, the general use of diamond. Due to expensive diamonds, the supply is also more intense. Therefore, it is necessary to find an economic method instead. This article specifically to introduce you to a not using diamond, grinding wheel to trim the guide wheel method. This method is not only economical but also highly accurate. First, the longitudinal feed to the unintentional grinding of the guide wheel for this method of processing unintentional bed guide wheel dressing, and grinding parts the same, the guide wheel is still inclined into an angle. Before trimming the guide wheel, trim the grinding wheel with diamonds first and then cut it into the guide wheel face with a distance of 0.02 mm for each pass.