Liquid modified photonic crystal fiber for simultaneous temperature and strain measurement

来源 :PhotonicsResearch | 被引量 : 0次 | 上传用户:hzau1
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
A liquid modified photonic crystal fiber (PCF) integrated with an embedded directional coupler and multi-mode interferometer is fabricated by infiltrating three adjacent air holes of the innermost layer with standard 1.48 refractive index liquids. The refractive index of the filled liquid is higher than that of background silica, which can not only support the transmitting rod modes but also the “liquid modified core” modes propagating between the PCF core and the liquid rods. Hence, the light propagating in the liquid modified core can be efficiently coupled into the satellite waveguides under the phase-matching conditions, resulting in a dramatic decrease of the resonant wavelength intensity. Furthermore, there is a multi-mode interference produced by modified core modes and rod modes. Such a compact (0.91 cm) device integrated with an embedded coupler and interferometer is demonstrated for high-sensitivity simultaneous temperature (14.72 nm/°C) and strain (13.01 pm/μ ) measurement.
其他文献
Noninvasive techniques, surface electromyography (sEMG) in particular, are being increasingly employed for assessing muscle activity. In these studies, local oxygen consumption and muscle metabolism are of great interest. Measurements can be performed non
从传感光纤的高双折射螺距和光纤结构两方面分析不同螺距下光纤内光的偏振态差异及其受温度变化的影响,对比了PANDA光纤、椭圆芯光纤、保偏微结构光纤的温度特性。结果表明,在全光纤电流传感器(FOCS)中,当传感光纤的螺距LT是光纤对应的未螺旋状态下拍长Lp的2倍时,温度特性最差。LT减小,光纤偏振保持能力减弱,抗物理干扰能力变差。当
期刊
With a tabletop hybrid Nd:YAG-Nd:glass laser as pump source, a compact optical parametric chirped pulse amplification (OPCPA) laser system with a peak output power of 16.7 TW and a pulse duration of 120 fs has been demonstrated. Chirped pulses are amplifi
Fast and sensitive air-coupled ultrasound detection is essential for many applications such as radar, ultrasound imaging, and defect detection. Here we present a novel approach based on a digital optical frequency comb (DOFC) technique combined with high-
期刊
对铯原子汽室中不同能级和不同温度的原子在不同光强和不同偏振光作用下的光学厚度进行了实验测量。理论上通过建立每个塞曼子能级的速率方程,利用龙格库塔算法求得了布居数随时间演化的数值解,从而得到了依赖于时间的吸收系数。考虑到原子热运动以及光束束宽对光学厚度的影响,利用数值积分得到了原子共振频率附近的平均吸收系数,进而利用比尔法对光通过铯原子汽室的透射曲线进行了精确的拟合,最终得到了实验系统中原子汽室光学厚度的精确值。理论分析和实验结果表明,随着温度的升高,光学厚度迅速增大;随着光强的增加,光学厚度略有变小。
到目前为止,报导的只是研制了用电子束横向泵浦的紫外半导体激光器,有用ZnO晶体的(λ=375~379 nm)和用ZnS晶体的(λ=330 nm)。但是,要解决在光栅光学显微术、光学定位术和光电印刷术中的一系列实际问题,使用纵向泵浦的激光器更有希望。本文报导了首次实现这种一定尺寸的ZnO晶体激光器。
期刊
为了进一步理解弹光调制器(PEM)的静态双折射和圆二色性,深入研究了PEM 偏振特性。运用Muller矩阵分别描述弹光调制、静态双折射和圆二色性的偏振特性,建立了同时考虑静态双折射和圆二色性的PEM 偏振特性模型;对该模型进行理论分析和仿真分析;搭建实验装置并进行了偏振调制实验。实验结果表明理论分析正确合理,PEM 的偏振特性应为微小静态双折射、弹光调制和微弱圆二色性效应的组合。此外,还精细测量了其中一个PEM样品的圆二色性值为2.755 × 10-2 ,静态双折射的相位延迟值b =
据“新科学家”杂法报导,扫描的氦氖激光束能帮助泰晤士河上的挖泥船更好地找寻其工作位置,从而节省了挖泥船在水中停留的时间。(如果挖泥船不能精确地知道自己的位置,它就必须在某个区域内重复行驶以保证把淤泥清除干净)。
期刊
理论推导了轴棱锥顶点离轴加工误差的透射率函数。在惠更斯-菲涅耳衍射积分理论和稳相近似法的基础上,推导出顶点离轴轴棱锥后的衍射光场表达式,分析了顶点离轴加工误差对贝塞尔光束的影响。对顶点离轴轴棱锥后衍射光场进行数值模拟,结果表明,当为理想加工轴棱锥时,轴棱锥后的光场分布为近似理想贝塞尔光束;当存在加工误差时,衍射光斑对半分离。相同距离处,分离程度随顶点离轴误差的增加而增加;相同的顶点离轴误差下,分离程度随传输距离的增加而增加。同时,还研究了这种元件的加工厚度对光斑分离程度的影响,结果表明,随着加工厚度的增加