【摘 要】
：
Mg alloys exhibit a number of good properties such as low density, good castability and high specific strength.However, molten Mg and Mg alloys are ignited with
【机 构】
：
Department of Advanced Material Engineering,Advanced Material Division
论文部分内容阅读
Mg alloys exhibit a number of good properties such as low density, good castability and high specific strength.However, molten Mg and Mg alloys are ignited without the melt protective gases during melting and casting process due to their high reactivity.The purpose of this study is to investigate effects of Ca and CaO on pure Mg through microstructure observation, ignition test and phase analysis.With increasing Ca and CaO contents, the ignition resistance of Ca or CaO added pure Mg is increased and the grains are refined.As results of XRD and EDS, CaO is reduced to Ca in CaO added pure Mg.Mg2Ca phase is formed even in 0.1 wt.%CaO added pure Mg by reduction mechanism, while Mg2Ca phase is formed over 1.35 wt.% Ca added pure Mg.
其他文献
The effect of sintering process (especially the sintering temperature) on the magnetic property and microstructure of sintered sample of nanosized soft magnetic
Support vector machine has become an increasingly popular tool for machine learning tasks involving classification, regression or novelty detection. Training a
Fe3O4 nanoparticles were prepared by chemistry co-precipitation and the mean crystal size was 17.9 nm measured by XRD. After it had been treated by silane-coupl
The effect of heat treatment on microstructure, equilibrium hydrogen sorption pressure and plateau slope of LaNi3.8Al0.75Mn0.45 alloy was investigated. X-ray di
The effect of vanadium content on the microstructure and hydrogen absorption/desorption properties in Ti-V-Cr alloys was studied. The results show that with the
Nanosized SrCe0.95Y0.05O3-δ powders with homogeneous composition were synthesized by the low temperature combustion process based on the Pechini method. A poly
The temperature dependence of the dynamic viscosity of Cu9In4 intermetallics melt has been investigated in five kinds of different heating and cooling processes
The effects of Mo on the microstructure and mechanical properties of Ti(C,N)-based cermets with low Ni have been studied systematically. Different contents of M
A novel method of global optimal path planning for mobile robot was proposed based on the improved Dijkstra algorithm and ant system algorithm. This method incl
Spherical Si solar cells were fabricated based on multicrystalline Si spheres produced by a dropping method. The thermal history of Si spheres were calculated b