论文部分内容阅读
PR0481-CN久保田牌联合收割机常见故障,多为不按规定方法操作,不及时清除茎杆杂草,以及各调节机构调节不良所致。 一、报警器发出断续的警报声 发生此故障时应减速,将收割离合器手柄和脱粒离合器手柄放到“离”的位置,停止收割,查看各仪表盘。 1.若负荷指示灯闪烁。说明是超负荷作业。①将脱粒深浅位置微调杆向右扳动;②检查切刀刃是否磨损,若磨损严重可进行研磨或更换;③将脱粒室导板调节手柄调整到“标准”或“开”的位置。
PR0481-Kubo Tian Harvester common faults, mostly do not follow the prescribed method of operation, do not promptly remove the stalk weeds, as well as the poor regulation of the regulatory agencies. First, the alarm intermittently sounded the alarm should be slow down when the fault occurs, the harvesting clutch handle and threshing clutch handle into the “off” position, stop the harvest, view the dashboard. 1. If the load indicator flashes. Description is overloaded. ① the threshing depth and position of the fine-tuning lever to the right; ② check the cutting edge is worn, if serious wear and tear can be ground or replaced; ③ the threshing chamber guide plate adjustment handle to “standard” or “open” position.