上海消防器材厂制造的BJ22型手抬机动消防泵,在县级公安消防队和工矿企业、农村集镇等专职和义务消防队广为使用。怎样使这种手抬泵在火场上尽快出水,迅速有效地投入战斗,谈一点个人的体会,供同志们参考。水泵内的水不要放掉。这种泵的引水方式是采用水环泵作引水器的,在起动前水环泵和初给箱内要加入足够的水。加水过程一般需要一分半钟左右。要使手抬泵在火场上能快出水,在使用或演习后水环泵和初给箱内的水不要放掉,同时把交换器手柄扳至“停止”位置。这样一旦遇警,不加水或加少量的水即可起动。如果用过有腐蚀性 BJ22 hand-held mobile fire pump manufactured by Shanghai Fire Equipment Factory is widely used in full-time and voluntary fire brigade at county-level public security fire brigade and industrial and mining enterprises and rural towns. How to make this hand-lift pump on the fire as soon as possible out of the water, quickly and effectively into battle, talk about personal experience for comrades reference. Do not let the water out of the pump This pump is a water diversion pump water ring for the pilot, before starting the water ring pump and the first tank to add enough water. The process of adding water generally takes a minute and a half. To lift the hand pump on the fire, do not let go of the water pump and water in the tank after use or exercise, and also switch the switch handle to “STOP” position. This case of police, without water or add a small amount of water to start. If used corrosive