【摘 要】
:
The precursor precipitation of InVO4 was synthesized by co-precipitation using indium trichloride (InCl3),ammonium metavanadate (NH4VO3) and ammonia (NH3-H2O) a
【机 构】
:
School of Materials Science and Engineering
论文部分内容阅读
The precursor precipitation of InVO4 was synthesized by co-precipitation using indium trichloride (InCl3),ammonium metavanadate (NH4VO3) and ammonia (NH3-H2O) as raw materials. The InVO4 sols with orthorhombic phase were obtained by hydrothermal treatment (the precursor precipitation solution at 423 K,for 4 h). The precursor and sol of InVO4 were characterized by X-ray diffraction (XRD),Fourier Transform Infra-red spectra (FT-IR),scanning electron microscopy (SEM) measurements. The XRD patterns indicate that the InVO4 precursor is amorphous phase,InVO4 sol contains orthorhombic InVO4 nanocrystals. The results also reveal that the pH value of the reaction mixture and reaction temperature play important roles to the target phase. InVO4-TiO2 thin films on glass slides were prepared by the dip-coating method from the composite sol. The photocatalytic properties of the InVO4-TiO2 thin films were investigated by the photocatalytic degradation of methyl orange solution. The results indicate that it has better photocatalytic activities than pure TiO2 thin films or pure InVO4 thin films with UV light.
其他文献
An electroless Ni-P plating treatment was applied on AZ91D magnesium alloy to improve its corrosion resistance. Optimum pretreatment conditions and optimum bath
The piezoelectric ceramics xPb(Mn1/3Sb2/3)O3-(1-x)Pb(Zr1/2Ti1/2)O3 (abbreviated as PMS-PZT) were synthesized by traditional ceramics process. The effect of sint
2195 aluminum-lithium alloy was widely applied in the aviation and aerospace industry, but it is highly susceptible to pitting and intergranular corrosion under
A quantitative study about the thermal activation of thermal donors (TD) in high resistivity magnetic Czochralski (MCz) silicon was carried out. The samples are
Rare earth composite materials radiating far-infrared rays were prepared according to far infrared absorption spectrum of main component in liquefied petroleum
Diamond-like carbon (DLC) films were prepared by PLD process using 308 nm(XeCl) laser beam with high power (500 W) and high frequency(300 Hz). The effects of ni
In order to improve the strip quality of continuous roll-casting process (CRP) of aluminum alloy, the investigations of the flow behavior within the metal pool,
Distribution of localized damage in shear band can t be predicted theoretically based on classical elastoplastic theory. The average damage variable in shear ba
Employing isothermal and isochronal differential scanning calorimetry, an analytical phase transformation model was used to study the kinetics of crystallizatio
The packaging poses a critical challenge for commercialization of MEMS products. Major problems with the packaging process include degraded reliability caused b