一、前言随着祖国工业的突飞猛进,特别是国防工业、化学工业和石油工业的需要,不锈钢的生产占着极重要的地位,很多产品零件不仅要求耐高温抗腐蚀,而且还要求一定的强度极限,质量要求越来越高;大部分不锈钢都要经过锻压后才能使用,而不锈钢又有着和一般普通钢材不同的特点,如低的导热率,锻造温度范围窄,热敏感性强,高温性能高,塑性低等,这些特点都给锻造带来了很大的困难,如何找出合理的锻造工艺,以获得优质的零件,是值得我们共同探讨的。本篇报导根据工厂几年来的生产实践,对 I. Introduction As the rapid development of the motherland’s industry, especially the defense industry, chemical industry and the needs of the oil industry, stainless steel production occupies a very important position, many product parts not only require high temperature corrosion resistance, but also requires a certain strength limit , The quality requirements are getting higher and higher; most of the stainless steel is forged to be used after use, and stainless steel has the general and ordinary steel different characteristics, such as low thermal conductivity, forging temperature range narrow, heat sensitivity, high temperature performance , Low plasticity, these characteristics have brought great difficulties forging, how to find a reasonable forging process to obtain high-quality parts, is worth our joint discussion. This article reports on the factory’s production practices over the past few years