【摘 要】
：
We propose a method of modulation format identification based on compressed sensing using a high-order cyclic cumulant combined with a binary tree classifier. Through computing the fourth-order cyclic cumulant of the pretreated band signal, which is obtai
【机 构】
：
StateKeyLaboratoryofInformationPhotonicsandOpticalCommunications,BeijingUniversityofPostsandTelecomm
【出 处】
：
ChineseOpticsLetters
论文部分内容阅读
We propose a method of modulation format identification based on compressed sensing using a high-order cyclic cumulant combined with a binary tree classifier. Through computing the fourth-order cyclic cumulant of the pretreated band signal, which is obtained by compressed sensing with the sampling rate much less than the Nyquist sampling value, the feature vector for classification is extracted. Simulations are carried out in the optical coherent fiber communication system with different modulation formats of multiple phase-shift keying and multiple quadrature amplitude modulation. The results indicate that this method can identify these modulation formats correctly and efficiently. Meanwhile, the proposed method is insensitive to laser phase noise and signal noise.
其他文献
热释电传感器用于红外目标跟踪,可以通过光学调制探测到运动目标的相对方向,而不能确定其准确距离,对此提出一种群智能搜索的动态热释电跟踪方法。传感器在摆动状态下感知红外目标,发现目标时,记录其探测角,通过分析探测角序列与运动目标轨迹离散点在极坐标系下的关系,将目标轨迹的确定转化为极径序列的确定,然后建立关于极径序列的多维粒子群空间,并构造评价粒子优劣的适应度函数,实现了运动目标轨迹的跟踪。该方法扩大了
光计算，其运算速度比高速子弹还快，其威力比机车还大，一次能处理充满一幢高层建筑的数据。遗憾的是，它至今还未变成现实，还不能拯救电子计算机遇到难关的领域。困难几乎如你所想象的，超级计算机——即光学计算机几乎完全仍是梦想。
S变换具有时频分析能力和多分辨率特点,可以看作是窗口傅里叶变换和小波变换的扩展。S变换不仅克服了傅里叶变换缺乏局部分析能力的不足,其变换系数又与待分析图像的傅里叶谱之间存在紧密联系,近年来被应用于条纹分析中。根据S变换系数的特点,深入研究了基于二维S变换的"脊"(2DSTR)分析方法和二维S变换"滤波"(2DSTF)分析方法,并对两种方法进行了详细对比。计算机模拟和实验验证了理论分析结果,研究结果
By using silicon-on-insulator (SOI) platform, 12 channel waveguides, and four parallel-coupling one-microring resonator routing elements, a non-blocking four-port optical router is proposed. Structure design and optimization are performed on the routing e
测量了一种绿色和红色CdSe/ZnS量子点/硅胶复合薄膜的吸收光谱和光致发光光谱。结果表明,量子点薄膜在不同的激发波长下,拥有稳定的光致发光光谱,峰值波长分别为527 nm和628 nm。将量子点/硅胶复合薄膜与YAG∶Ce 3 黄色荧光粉结合,制备了两种不同结构的白色发光二极管(WLED),测量了其在不同驱动电流下的光学性能和表面温度。在350 mA的驱动电流下,Ⅱ号WLED的表面温度比Ⅰ号WLED低26.5 ℃。在55 ℃温度和55%相对湿度条件下进行老化实验。结果表明,在不同的驱动电流下两种WLED
A low-loss hybrid plasmonic transverse magnetic (TM)-pass polarizer has been demonstrated utilizing polarization-dependent mode conversion. Taking advantage of the silicon hybrid plasmonic slot waveguide (HPSW), the unwanted transverse electric (TE) funda
To improve the accuracy of color image reproduction from displays to printers, an adaptively spatial color gamut mapping algorithm (ASCGMA) is proposed. In this algorithm, the compression degree of out-of-reproduction-gamut color is not only related to th
对于传统的显微镜来说,其相衬成像模式需要通过配备专用光阑、聚光镜或者在物镜上添加嵌件来实现,这就增加了相衬显微成像的难度和成本。鉴于此,本文提出了一种基于深度学习算法的虚拟相衬成像方法,只需要采用一台普通的光学明场显微镜获取细胞明场图像,然后使用深度学习方法,就可以将明场图像转换成相衬图像。将虚拟相衬图像与显微镜获取的标准相衬图像进行对比,对比结果证明了这种虚拟相衬成像方法的有效性,为低成本相衬显微成像提供了范例。
在传统的一维光子晶体中加入多个周期排列的双单负材料缺陷, 可观察到零有效相位带隙内的缺陷模。计算结果表明：若两种单负材料缺陷厚度相等, 增大缺陷层的总厚度会使零有效相位带隙内的缺陷模频率间隔变大, 对应的透射率降低。若改变两种单负材料缺陷的厚度比, 缺陷模的频率间隔也随之变化。当两种单负材料缺陷的厚度满足零平均磁导率和零平均介电常数条件时, 发生缺陷模简并的现象。另一方面, 入射角的变化对零有效相位带隙中的缺陷模影响较小, 但却可以产生新的角度带隙。角度带隙范围与缺陷层厚度无关, 会随入射角的增大而变宽。
With tin diselenide (SnSe2) film as a saturable absorber (SA), the passively Q-switched self-frequency doubling (SFD) lasers were realized in Nd3 :ReCa4O(BO3)3 (Re = Y, Gd) crystals.