Structure and magnetic properties of amorphous and polycrystalline Fe3O4 thin films

来源 :中国有色金属学会会刊(英文版) | 被引量 : 0次 | 上传用户:albalb
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
Half-metallic Fe3O4 films prepared by DC magnetron reactive sputtering with a tantalum(Ta) buffer layer was investigated. Primary emphasis is placed on the structural impact on its magnetic properties. The experimental results show that the amorphous Fe3O4 films exhibit a superparamagnetic response at a large-scale from 20 nm to 150 nm,and the magnetoresistance (MR) isnt detected. By contrast,the polycrystalline Fe3O4 films possess large saturation magnetization Ms of 420 A/(kg-cm) and a clear magnetoresistance with a field of 40 kA/m. The unusual properties for the amorphous Fe3O4 film are attributed to the existing large density of the similar structure as anti-phase boundaries in the film.
其他文献
The hollow sphere fly ash/6061Al composite with about 43% porosity in volume fraction (produced by the addition of hollow sphere fly ash particles) was fabricat
ZnFe2O4-based inert anodes were made to conduct the aluminum electrolysis tests. The corrosion behaviors of the inert anodes were examined and discussed. Experi
A 2D woven graphite fibers reinforced aluminum matrix composite with 50%Grf (volume fraction) was fabricated by the squeeze-casting technology, and its microstr
In Nb-Si based alloys with a two-phase NbSS/ intermetallic Nb5Si3 structure, the Nb5Si3 provides high-temperature strength, while the Nb solid-solution phase, N
The formation mechanism of bulge on the works surface during the extrusion process was analyzed. The bulges size and the reasons for abscission were studied. Th
30%Al2O3p/Al-Cu-2.0Mg composite and Al2O3p/Al-Cu-2.5Mg composite with 0.3 μm-Al2O3 particles were fabricated.Age-hardening behaviors of two composites and the
The technology of length-alterable line-scanning laser sintering was introduced. Based on the research of laser heating property,powder thermal physics paramete
Based on initial discontinuity state (IDS) of material, a preliminary analytical model was presented to evaluate the effect of interaction of pitting corrosion
A kind of aluminum cooler was manufactured by means of vacuum brazing technique, and the cooler was examined by hydraulic pressure test. The result indicates th
The titanium dioxide sols were synthesized with tetrabutyl titanate as precursor,diethanolamine(DEA) as complexing agent ,polyethylene glycol (PEG) as organic t