论文部分内容阅读
太极2220外围子系统可分两类,其一是为构成一基本系统所必须的加载设备和系统设备。其二则为扩充整个系统能力的选件。小配置的系统,加载设备可采用5(1/4)″软盘,1/2″或1/4″盒式磁带机。系统设备则使用5(1/4)″的温盘,目前其单台容量为86MB。大配置的系统,加载设备使用1/2″工业标准的起/停式或数据流磁带机,系统设备使用工业标准的SMD接口的温盘。其规格可为8″,9″14″,目前单台容量为500MB左右。另一方面,用户还可根据自己的需要,选配各种选件,其中包括异步通讯接口,同步通讯接口,网络接口,各种实时选件,各种打印机及终端设备等。本文就我们目前已经生产的和正在开发的外围子系统的主要技术特性,做一简要的介绍。
The Taiji 2220 peripheral subsystem can be divided into two categories, one is the loading equipment and system equipment necessary to form a basic system. The second is an option to expand the system’s capabilities. For small configurations, 5 “(1/4)” floppy disks, 1/2 “or 1/4” tape cartridges can be used as loading devices, and 5 (1/4) “temperature pads for system devices, Taiwan capacity of 86MB. Large-configuration system with 1/2 ”industry-standard start / stop or data stream tape drives for loading devices and industry-standard SMD connectors for system equipment. Available in 8“, 9 ”14" A single capacity of about 500MB. On the other hand, the user can also according to their own needs, matching a variety of options, including asynchronous communication interface, synchronous communication interface, network interface, various real-time options, various printers and terminal equipment. This article gives a brief overview of the major technical features of the peripheral subsystems that we currently produce and are currently developing.