论文部分内容阅读
In this paper,the disturbance propagation and active vibration control of a finite L-shaped beam are studied.The dynamic response of the structure is obtained by the travelling wave approach.The active vibration suppression of the finite L-shaped beam is performed based on the structural vibration power flow.In the numerical calculation,the influences of the near field effect of the error sensor and the small error of the control forces on the control results are all considered.The simulation results indicate that the structural vibration response in the medium and high frequency regions can be effectively computed by the travelling wave method.The effect of the active control by controlling the power flow is much better than that by controlling the acceleration in some cases.And the control results by the power flow method are slightly affected by the locations of the error sensor and the small error of the control forces.
In this paper, the disturbance propagation and active vibration control of a finite L-shaped beam are studied. The dynamic response of the structure is obtained by the traveling wave approach. The active vibration suppression of the finite L-shaped beam is performed on the structural vibration power flow. In the numerical calculation, the influences of the near field effect of the error sensor and the small error of the control forces on the control results are all considered. The simulation results indicate that the structural vibration response in the medium and high frequency regions can be achieved calculated by the traveling wave method. The effect of the active control by controlling the power flow is much better than that by controlling the acceleration in some cases. And the control results by the power flow method are slightly affected by the locations of the error sensor and the small error of the control forces.