论文部分内容阅读
如何迅速、准确地调整旋转抛物面天线反射面是以往整架联试中无法回避而又不能快速解决的问题。本文为有效地解决这个问题提供了一个很好的方法,即把微机技术引入地面站天线的调配和精度测量。采用本系统不仅给产品的质量保证提供了一个现代化的手段,而且有很好的经济效益。在精度检测方面提高效率10倍以上。86年底在“六米地面站认证会”上得到与会者的一致好评。起初雷达天线反射面微机检测和调整系统,安装在我所的六米生产线上,原来的生产线采用样板人工读数工艺,这种工艺是本所的传统工艺,简单、直观,但速度慢,读数质量受人的影响太大。现系统在原来的样板上安装了十只非接触式电涡流传感器,正对测点的法
How to quickly and accurately adjust the rotating parabola antenna reflector is the unavoidable problem that can not be avoided but can not be solved quickly in the past. This article provides a good way to effectively solve this problem, that is, the introduction of microcomputer technology to ground station antenna deployment and accuracy measurement. This system not only provides a modern means of product quality assurance, but also has good economic benefits. In the accuracy of testing to improve efficiency 10 times more. By the end of 86 in the “six meters on the ground certification meeting” by the participants alike. At first, the radar antenna reflection surface microcomputer detection and adjustment system was installed on our six-meter production line. The original production line adopted the model manual reading process, which is the traditional process of our company. It is simple and intuitive, but the speed is slow and the quality of reading Affected by people too much. Now the system installed in the original model of ten non-contact eddy current sensor, is the method of measuring points