论文部分内容阅读
1985年1月11日,潘兴2导弹在西德海尔布隆附近的基地进行组装训练,在组装第三发导弹,试图把第一级发动机从包装箱中吊出时,第一次试吊,由于吊车臂位置不当,发动机前端被包装箱内紧固支架卡住而没有吊起来。第二次试吊,由于又一次被卡住,发动机便向后移动了几英寸,再次起吊发动机与支架脱开。但当头部离开支架约18cm、尾部离开支架约9cm时,发动机顿时起火爆炸。火是从距发动机前端约239cm处
On January 11, 1985, the Pershing 2 missile was assembled and trained at a base near Hebron in West Germany. When the third-stage missile was assembled and the first-stage engine was attempted to be lifted out of the box, , Due to improper crane arm position, the front end of the engine is stuck in the packing box fastening bracket without hanging up. The second trial hanging, due to be stuck again, the engine will be moved back a few inches, again lifting the engine and stand off. However, when the head left the stent about 18cm, the tail leaving the stent about 9cm, the engine immediately burst into fire. The fire is about 239cm from the front of the engine