论文部分内容阅读
我厂设计制造的大型齿轮双啮综合测量仪,经使用效果良好。图1为仪器的外形图。检测时,被测齿轮1架在中心支承座2上,移动两边顶座3至适当位置后锁紧,转动手轮4,顶针将工件顶起,然后用手柄5将顶针套筒锁紧,完成被测齿轮的安装和定位。标准齿轮装于主轴6上,转动手轮7,滑座8向前移动,使标准齿轮和被测齿轮相互啮合,然后用手柄9将滑座锁紧。被测齿轮与标准齿轮通过滑座上拉簧使其紧密接触,被测齿轮的径向误差通过滚动导轨在测微仪15或电感测头反映出来。
I plant design and manufacture of large gear double-loop comprehensive measuring instrument, the use of good results. Figure 1 is the outline of the instrument. Detection, the measured gear 1 frame 2 in the center of the support, move both sides of the top seat 3 to the appropriate position after the lock, turn the hand wheel 4, thimble top of the workpiece, and then use the handle 5 to lock the thimble sleeve, completed The measured gear installation and positioning. Standard gear mounted on the spindle 6, turn the hand wheel 7, the carriage 8 moves forward, so that the standard gear and the measured gear meshing with each other, and then use the handle 9 to lock the carriage. The measured gear and standard gear through the slider pull the spring to make close contact with the measured gear radial error through the rolling guide in the micrometer 15 or inductive probe reflected.