论文部分内容阅读
一、前言南宁手扶拖拉机厂的原设计,生产纲领为年产手扶拖拉机1万台。原设计中,利用金工装配厂房内的一块长96米宽6米空面积,作为零件中间存放地。贮存时,由机一、机二车间来的零件,用手扶拖拉机挂拖斗运到,并倾倒于地面,然后用人工码垛或装筐存放。取用时,又得按同样方式运到装配线工位上。零件装卸次数,最少也需四次之多。零件码垛方式不一,又难以清点,且管理不便。劳动强度既大,还有垛垮伤人事故发生。零件磕碰损坏较多,手扶拖拉机烟雾、噪声污染环境也较严重。
I. Introduction Nanning walking tractor factory’s original design, production program for the annual output of walking tractors 10,000 units. The original design, the use of metalworking assembly plant within a 96 meters long and 6 meters wide empty area, as part of the middle of storage. Storage, by the machine one machine two parts to the workshop, with tractor trailers hauled to, and dumped on the ground, and then use manual stacking or loading basket storage. Access, they have to be the same way to the assembly line station. Parts loading and unloading times, at least four times as much. Parts stacking different ways, but also difficult to count, and management inconvenience. Labor intensity is large, there are still incidents of collapsing wounding. More parts knock damage, walking tractor smoke, noise pollution of the environment is more serious.