【摘 要】
：
We used Raman spectroscopy to study the conformational changes of DNA induced by Cd2 ions in different Cd2 concentrations solution. The experimental results show that when the Cd^(2 )/PO^(-)_(2) ratio R increased from 0 to 3.0, the band 835.0 cm^(-1) sh
【机 构】
：
InstituteofLaserLifeSciences,SouthChinaNormalUniversity,Guangzhou510631DepartmentofMedicalOncology,C
【出 处】
：
ChineseOpticsLetters
论文部分内容阅读
We used Raman spectroscopy to study the conformational changes of DNA induced by Cd2 ions in different Cd2 concentrations solution. The experimental results show that when the Cd^(2 )/PO^(-)_(2) ratio R increased from 0 to 3.0, the band 835.0 cm^(-1) shifted about 8 cm^(-1), and the overlapping spectra of 1446.0 and 1461.0 cm^(-1) separated and moved to 1441.0 and 1458.0 cm^(-1), respectively. This indicates that the conformation of DNA has changed from a "normal" B-form to a "modified" B'-form. At the same time, changes of other bands demonstrate that parts of base stacking collapse and some hydrogen bonds between AT are disrupted, AT base pairs are damaged more larger than GC base pairs.
其他文献
视网膜血管分割是检测多种眼病的重要手段,在视网膜疾病自动筛查系统中发挥重要作用。针对现存方法对细小血管分割不足且易出现病理误分割的问题,提出了一种基于多尺度注意力解析网络的分割算法。该网络以编码-解码架构为基础,在子模块中引入注意力残差块,加强了特征传播能力,降低了光照不均、对比度低对模型的影响;在编码器和解码器之间增加跳跃连接并去掉传统池化层,以保留足够的血管细节信息;运用并行多分支结构和空间金
Finger-vein recognition is widely applied on access control system due to the high user acceptance and convince. Improving the integrity of finger-vein is helpful for increasing the finger-vein recognition accuracy. During the process of finger-vein imagi
The principle of band-limited space optical communication system using the techniques of space diversity methods and time domain Rake receiver is analyzed. The joint channel equalizer method combining diversity reception and equalization technique is pres
主动锁模激光器对激光腔长的稳定性要求很高, 百微米的腔长变化可造成锁模失谐, 严重影响锁模输出稳定性。采用传统的机械或压电陶瓷直接移动腔镜调整腔长的方法, 易造成腔镜失谐, 工作量非常大。研制了一种新型精密腔长补偿器, 结构简单、方便实用, 腔长调节精度会大幅提高, 且不易造成腔镜失谐, 对皮秒激光脉宽的展宽影响可以忽略。此外, 对新型精密腔长补偿器的工作原理、补偿精度和腔镜失谐的影响等进行了理论分析和数值计算; 将其应用于高峰值功率主动主动瞬态脉冲锁模激光系统, 经长时间的应用, 发现其稳定可靠, 具有
通过研究弧面扭曲结构件激光熔覆成形轨迹规划难点,解决了以弧线为渐变路径的扭曲结构分层问题。基于中空激光内送粉熔覆成形技术并结合结构件自身几何特征,提出离散渐变分层法。首先在基体法平面内纵向分层,随后将各层二次离散成独立单元,最终按等圆心角将离散单元拼接成熔覆路径,成功实现了弧面扭曲结构件激光熔覆成形。所得成形件尺寸精度较高,表面平均粗糙度低至1.323 μm,抗拉强度为765.81 MPa;不同区域的微观组织和显微硬度分布均匀,无明显气孔或夹杂缺陷。
Off-axis aspherical mirrors are growing in popularity in modern space-borne cameras having high resolutionand large field of view. Fabrication processes for these mirrors include surface generation by grinding wheel, free-abrasive lapping, and various pol
目前，对于红宝石激光器的Q调制，开始应用各种染料溶液，这些染料溶液在7,000埃附近的光谱区具有吸收带。但对于用三价钕离子激活的玻璃激光器（受激辐射波长λ=1.06微米），目前却只有一种化合物——五碳菁三色素。利用这种染料获得了具有0.1焦耳的单脉冲。
温室气体监测是美国气象学会年会上的热门话题:国际研究机构集中讨论全球卫星群，各家公司热衷展示新一代传感器。