【摘 要】
：
Inorganic tubular nanostructure MS2 (M=Mo, W, Nb, Ta) were synthesized by two alternative routes. Thermal decomposition method was used for producing fullerence
【机 构】
：
College of Physics,School of Material Science and Engineering
论文部分内容阅读
Inorganic tubular nanostructure MS2 (M=Mo, W, Nb, Ta) were synthesized by two alternative routes. Thermal decomposition method was used for producing fullerence-like MS2 (M=Mo, W) nanotubes on Al2O3 template using ammonium sulfur respectively; NbS2, and TaS2 nanotubes were obtained successfully by reducing corresponding metal trisulfide in a stream of H2 (mixed with N2 in some cases) at elevated temperatures.Detailed experimental procedure, and the characterization of associated results, were evaluated using X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and high resolution transmission electron microscopy (HRTEM). The result reveals that products are composed of high density of MS2 tubular nanostructures with the diameter of 100 nm and length of tens of micrometers. And no mistake, these 1-D (one-dimensional) tubular nanomaterials added quantities and varieties in the growing family of nanotubes of inorganic layered materials.
其他文献
This Paper proposes a modified operation mode of batch extractive distillation with two reboilers.The separation of ethanol and water using as ethylene glycol i
To investigate the early-age behaviors of concrete under a restrained condition, a set of apparatus was developed. In this way, the tensile creep and other earl
在盐法破壁的基础上,添加质壁分离剂。当酵母浓度为10%、氯化钠浓度为5%时,添加5 mL乙酸乙酯,并在100℃下抽提2 h,可以增加核酸的提取率和纯度,使得提取率达到60%。
The electrical conductivity of Cu-10Ag in situ filamentary composite was studied during the deformation and annealing processes. The dependence of electrical re
Springback is caused by the redistribution of stress in sheet material after the tooling is removed. Precise prediction of sheet springback is very important in
The tensile and fatigue behavior of a dispersoid strengthened, powder metallurgy Al-Fe-V-Si alloy at ambient and elevated temperatures was investigated. The res
The adsorption isotherms of mixtures of linear alkanes, involving n-pentane, n-hexane, and n-heptane in pillared layered materials (PLMs) with three different p
Layered ternary ceramics represent a new class of solids that combine the merits of both metals and ceramics.These unique properties are strongly related to the
The spangles on hot dip galvanized steel sheet were investigated on an X-ray diffraction(XRD) meter by the rotating crystal method. The correlations between the
The titled high performance foamed concrete was developed from Portland cement, ultra fine granulated blast-furnace slag, pulverized fly ash and condensed silic