论文部分内容阅读
1、开机时应先打开显示器,再打开电脑主机电源。 2、在电脑的使用过程中,如果需要重新启动,应该用“热启动”。热启动是不切断机器电源的重新启动,电流对主板电路的冲击小。冷启动是叨断电源后重新通电,对主板电路的冲击大。不过频繁的热启动对机器也不利。 3、关机时,先按电脑电源开关,不能直接拔去电源插头的方法,那有可能造成硬盘和其它器件的损害。有的显示器用单独的开关控制电源,主机关机后显示器仍然通电,要注意将其关闭。关机后若要再次开机,必须在10秒之后。
1, the boot should first turn on the monitor, and then turn on the host computer power. 2, in the process of using the computer, if you need to restart, you should use “hot start.” Hot start does not cut off the power of the machine to restart, the impact of current on the motherboard circuit is small. Cold start is power off after the re-power on the motherboard circuit impact. However, frequent hot-start is not good for the machine. 3, shutdown, press the computer power switch, you can not unplug the power plug directly, it may cause damage to the hard disk and other devices. Some monitors with a separate switch control power, the host is still powered off after the display, pay attention to turn it off. To turn it on again after power off, it must be after 10 seconds.