【摘 要】
：
Castor oil-based cationic waterborne polyurethane (CWPU) was synthesized by pre-polymer process using castor oil (CO), poly(adipic acid-1,4-succinate diol) (PBA), isophorone diisocyanate (IPDI), and N-methyldiethanolamine (MDEA). The influences of the con
【机 构】
：
School of Chemistry,Chemical Engineering and Life Sciences,Wuhan University of Technology,Wuhan 4300
【出 处】
：
武汉理工大学学报（材料科学版）（英文版）
论文部分内容阅读
Castor oil-based cationic waterborne polyurethane (CWPU) was synthesized by pre-polymer process using castor oil (CO), poly(adipic acid-1,4-succinate diol) (PBA), isophorone diisocyanate (IPDI), and N-methyldiethanolamine (MDEA). The influences of the content of CO and MDEA on comprehensive performance and finished fabric properties of cationic waterborne polyurethane was investigated, especially the antibacterial properties of finished fabric. The CWPU latex particle size and its distribution decrease as the content of CO increased from 0wt％ to 16.8wt％, and increases afterwards. The CWPU films show much higher thermal stability than cationic waterborne polyurethane without CO. The surface of fabrics was characterized by scanning electron microscope (SEM). The finished fabric surface is much smoother. In addition, the finished fabric with CWPU emulsion has better antibacterial property against E. coli and S. aureus. When MDEA content is 8％, the antibacterial rates of the two kinds of bacteria are 77.3％ and 82.2％, respectively.
其他文献
Low-cost porous calcined dolomite microspheres were prepared by simple spray drying and subsequent calcination. Effects of calcination temperature on phase evolution and adsorption properties of MB were investigated systematically. Results showed that mic
Polystyrene crosslinked microspheres were prepared by soap-free emulsion polymerization using styrene (St) and divinylbenzene (DVB) as monomers; then, the microporous structure was knitted by the Friedel-Crafts alkylation reaction, and the Au nanoparticle
The CdS/ spherical g-C3N4 n-n heterojunction photocatalyst was fabricated via a solvothermal method. The tetracycline was used to characterize the photocatalytic properties of the as-developed hybrids. The photocatalytic degradation mechanism of the as-de
Chemically functionalized carbon nanotubes were combined with PVC to enhance both toughness and strength by simply mixing long alkyl chain modified multi-wall carbon nanotubes (abbreviated as MWNTs) or Ester-functionalized soluble MWNTs (abbreviated as eM
The preparation of SiBNC ceramic oxidation-resistant coating on carbon fiber via precursorsolution infiltration and pyrolysis (PIP) method was presented and discussed in detail. Moreover, the microstructures and the components of the coating were characte
Nickel oxalate micro-spheres with core-shell structure of solid core and radiate shell were synthesized by precipitation method in a mixed water solution,with oxalic acid and nickel acetate as raw materials,through dropping ammonium hydroxide to adjust th
The starch/polyvinyl alcohol (PVA)/ microfibrillated cellulose (MFC) composite films were prepared using solution casting method after adding MFC into starch/PVA blend matrix. The effects of MFC content on the mechanical properties of starch/PVA composite
The brine-freeze-thaw durability (defined as the durability under freeze-thaw cycles in Qinghai salt lake brine) of concrete (ordinary Portland cement concrete (OPC), high performance concrete (HPC-a), high performance concrete with steel fiber (HPC-b), a
In order to investigate the synergistic effect of re-dispersible powder-ethylene-vinyl acetate copolymer (EVA) and polypropylene fiber on the crack resistance of concrete under thermal fatigue loading, the compressive strength, ultimate tensile strength,
Bagasse fibers were modified using NaOH, KH550, and NaOH/KH550, respectively, and used as reinforcement to prepare bagasse/starch/PVA composite. A combination of Fourier-transform infrared (FTIR) spectroscopy and X-ray diffraction (XRD) was used to invest