在设备维修及二级保养过程中,常常碰到拆装车床溜板箱、齿轮箱的工作,由于缺少起重设备,通常依靠人力来抬,劳动强度大,也很不安全。为此,我们搞了一台多用途工作车。效果很好,使用方便、用途广泛,很受修理人员的欢迎。推动手把16,可以使车子在地面上自由移动。转动手轮9,使升降螺母8作上下移动,改变摇杆5与地面的夹角,使其带动固定台面6作升降运动,活动台面1底面焊有T In the equipment maintenance and secondary maintenance process, often encounter disassembly lathe slide box, gear box work, due to the lack of lifting equipment, usually rely on human lift, labor-intensive, but also very unsafe. To this end, we engaged in a multi-purpose work car. Good effect, easy to use, wide range of uses, very popular with the repair staff. Push handlebar 16 to allow the car to move freely on the ground. Turn the hand wheel 9, so that the nut 8 for up and down movement, changing the angle between the rocker 5 and the ground, so that it drives the fixed table 6 for lifting movements, the bottom surface of the movable table 1 welding T