【摘 要】
：
Stimulated Raman-scattering-based lasers provide an effective way to achieve wavelength conversion. However, thermally induced beam degradation is a notorious obstacle to power scaling and it also limits the applicable range where high output beam quality
【机 构】
：
CenterforAdvancedLaserTechnology,HebeiUniversityofTechnology,Tianjin300401,ChinaHebeiKeyLaboratoryof
【出 处】
：
HighPowerLaserScienceandEngineering
论文部分内容阅读
Stimulated Raman-scattering-based lasers provide an effective way to achieve wavelength conversion. However, thermally induced beam degradation is a notorious obstacle to power scaling and it also limits the applicable range where high output beam quality is needed. Considerable research efforts have been devoted to developing Raman materials, with diamond being a promising candidate to acquire wavelength-versatile, high-power, and high-quality output beam owing to its excellent thermal properties, high Raman gain coefficient, and wide transmission range. The diamond Raman resonator is usually designed as an external-cavity pumped structure, which can easily eliminate the negative thermal effects of intracavity laser crystals. Diamond Raman converters also provide an approach to improve the beam quality owing to the Raman cleanup effect. This review outlines the research status of diamond Raman lasers, including beam quality optimization, Raman conversion, thermal effects, and prospects for future development directions.
其他文献
金属卤素钙钛矿材料作为一种新型的半导体材料，因具有吸收截面大、载流子扩散长度较长、发光量子效率高、色纯度高以及发光波长可调等优势，在照明显示、太阳能电池、光电探测和生物成像等光电领域展现出广阔的应用前景。然而，钙钛矿材料仍然存在一些阻碍其在实际中应用的问题，比如：蓝光钙钛矿量子点的发光效率较低，红光钙钛矿的稳定性较差，Pb2 离子具有一定毒性。掺杂钙钛矿材料可以在一定程度上解决这些问题，同时可以提高其光学/电学性能。本文系统介绍了掺杂钙钛矿材料的合成，A位、B位以及X位离子掺杂或取代
红外显微成像技术将红外光谱技术和显微技术相结合,不仅可以提供测试样品的光谱信息而且能够提供测试样品的空间分布信息。然而复杂样品的红外显微图像谱峰重叠严重,无法直接获得目标组分的分布信息。将因子分析与光谱分离技术相结合提出了主成分分析-二阶导数光谱成像方法。通过兔子动脉红外显微图像中胆固醇分布的成像实验,验证该方法的可行性和有效性。实验结果表明,该方法可以提高光谱分辨率,挖掘隐藏于重叠谱峰中的有用信
研究了超短光脉冲在GaAs表面激发相干亚毫米波振幅随入射角变化的规律,前后向辐射比值随入射角度变化的规律,实验测量了在GaAs表面镀上极薄金属薄膜后所产生的相干亚毫米波振幅对薄膜厚度的依赖关系;利用光生载流子偶极辐射的理论模型成功地解释了实验得到的角度依赖关系和相干亚毫米波的偏振特性。
本文着重报导了共振三光子电离的实验.测量了电离讯号与光强的关系,获得了预期的电离饱和效应,以及确定了每个光脉冲的原子数目为6×10~8个原子.
在激光电弧(MIG)复合对接焊中，焊缝成形尤其焊缝根部(反面)成形状况的好坏，是衡量复合焊焊接质量及其适应能力的重要指标。为研究视觉信号和焊缝根部成形的关系，建立了由辅助照明光源、可触发拍摄的CCD摄像机、以电弧焊接电流为信号源的触发电路以及图像采集卡组成的视觉传感系统。通过在工件底面拍摄的方法，得到了清晰的熔池背面实时图像。分析了拍摄过程的成像机制，并开发了一套算法实时检测背面熔宽、坡口间隙宽度以及熔池相对坡口的偏移量，结果表明实时检测到的熔宽和实际的焊缝背面宽度有很好的对应关系。
法国通用电气公司与圣哥班公司（Compangnie de hint Gobain)即将合伙建立“激光工业公司”。
Specified ultra-short pulse waveforms could be synthesized with high-resolution zero-dispersion pulse shaping system. The system and parameters are analyzed and discussed. The pulse shaping system with optimized parameters could resolve the frequency comp
A history and a glimpse into the future of spaser (acronym for “surface plasmon amplification by stimulated emission of radiation”) is provided. The spaser (also called a plasmonic nanolaser) is an active nanosystem including a gain medium and a nanoplasm
澳大利亚将参与跟踪刚从加利福尼亚洛姆波克(Lompoc)发射的Seasat-A卫星。澳大利亚科学部长韦伯斯特（James J. Webster)说，由堪培拉附近的科学部所操纵的奥罗拉尔（Orroral)山谷航天跟踪站将对卫星上各种仪器供能，并将数据传送到美国的任务控制中心。
Total green leaf area (GLA) is an important trait for agronomic studies. However, existing methods for estimating the GLA of individual rice plants are destructive and labor-intensive. A nondestructive method for estimating the total GLA of individual ric