论文部分内容阅读
今年以来,我厂在增产节约运动中,通过学习山东济宁砖瓦厂的经验,在瓦坯成型上采用了胶模压瓦,并试验研究成功自动割瓦边,在生产中获得显著成效,其具体经济效果:1.节约材料费。据初步计算,一套胶模可压瓦坯50万片,而一套石膏模只能压瓦坯1,500片。按今年我厂瓦坯产量计算,需用石膏模3,200套,每套3元,共计9,600元;而改用橡胶模,只要10套就够用了,每套83元,全年只需830元,再加上润滑用油需要2,904元,共计3,734元,两相比较,全年可以节约5,866元。2.节约劳动力。由于自动割瓦边,可以减
Since the beginning of this year, in the process of increasing production and saving production, our factory has adopted the experience of Shandong Jining Brick and Tile Factory, adopted the rubber mold pressing tile on the billet forming, and successfully tested and automatically cut the edge of the tile, achieving remarkable results in production. Economic effect: 1. Save material costs. According to preliminary calculations, a set of rubber molds can press 500,000 pieces of tile blanks, and a set of plaster molds can only press 1,500 pieces of blanks. According to the calculation of our factory’s billet production this year, we need to use 3,200 sets of plaster molds, each set to 3 yuan, for a total of 9,600 yuan; and to use rubber molds, as long as 10 sets are enough, each set of 83 yuan, only 830 yuan for the whole year The amount of oil needed for lubrication is 2,904 yuan, which totals 3,734 yuan. Compared with the two, the annual savings can be 5,866 yuan. 2. Save labor. Because of the automatic cutting of the edges, it can be reduced