论文部分内容阅读
本研究采用低压等离子喷涂工艺，在317L不锈钢基体上喷涂了钛涂层，制备出钛涂层的种植体。通过动物的植入实验，研究了这种种植体的生物相容性；并综合利用扫描电镜、电子探针、X射线衍射仪等分析仪器对涂层的微观结构、涂层—基体界面成分分布等进行了研究；同时也对涂层种植体的电化学性能进行了研究。结果表明，喷涂过程对不锈钢基体本身的力学性能影响很小；钛涂层结合良好，其与骨组织的生物相容性能优于未涂钛涂层的。
In this study, a low-pressure plasma spraying process was used to spray the titanium coating on a 317L stainless steel substrate to prepare titanium-coated implants. The biocompatibility of the implants was studied through animal implantation experiments. The microstructure, coating-matrix interface composition of the implants were analyzed by scanning electron microscopy, electron probe and X-ray diffraction. Etc .; also studied the electrochemical properties of coated implants. The results show that the spraying process has little effect on the mechanical properties of the stainless steel substrate itself. The titanium coating has a good combination with biodegradable titanium coating.