论文部分内容阅读
In this article, the microstructure, hardness, and corrosion resistance of the Al0.3CrFe1.5MnNi0.5Tixand Al0.3CrFe1.5MnNi0.5Six(x = 0, 0.2, 0.5, 1.0) high-entropy alloys were investigated via X-ray diffraction(XRD)scanning electron microscopy(SEM), digital display Vickers hardness tester, and electrochemical technique These alloys are mainly composed of BCC solid-solution structure. When adding high content of Ti or Si elemen(x C 0.5), some intermetallic compounds are found in the microstructure, which makes the alloys have a high hardness, high brittleness, and easy cracking. While the alloys with low content of Ti or Si(x = 0.2) have a hardness of HV 420–HV 430, and its hardness increases about 14 %compared with that of Al0.3CrFe1.5MnNi0.5. Electrochemical results in 3.5 % NaCl solution show that the alloying elements Ti and Si have a negative influence on the corrosion resistance of the Al0.3CrFe1.5MnNi0.5alloys.
In this article, the microstructure, hardness, and corrosion resistance of the Al0.3CrFe1.5MnNi0.5Tixand Al0.3CrFe1.5MnNi0.5Six (x = 0, 0.2, 0.5, 1.0) high-entropy alloys were investigated via X-ray diffraction (XRD) scanning electron microscopy (SEM), digital display Vickers hardness tester, and electrochemical techniques These alloys are mainly composed of BCC solid-solution structure. When adding high content of Ti or Si elemen (x C 0.5), some intermetallic compounds are found in the microstructure, which makes the alloys have a high hardness, high brittleness, and easy cracking. While the alloys with low content of Ti or Si (x = 0.2) have a hardness of HV 420- about 14% compared with that of Al0.3CrFe1.5MnNi0.5. Electrochemical results in 3.5% NaCl solution show that the alloying elements Ti and Si have a negative influence on the corrosion resistance of the Al0.3CrFe1.5MnNi0.5alloys.