论文部分内容阅读
四川石油管理局川西北矿区设备库,两年多来已建造了 2200米~2活动库棚,基本解决了现场设备的存放吊装问题。 根据设备存放和吊装的需要,决定了活动库棚的基本结构(见图)。 1、左右两翼开启式:为了便于多存设备、车辆进入和吊装,活动库棚采用背靠背的摆放方法,车道两旁都可以摆放设备,这样库房面积利用率高。为了便于吊装,在两排设备中间立柱子,使左右两翼分别可以提升或放下。中间立柱将承担棚盖的全部重量,并能经受大风的考验,因此,中间柱子采用双柱形式,其中心距为1米,柱子底座用地脚螺丝固定,以保证稳定性。 2、棚盖组合式:采用主棚盖、脊瓦棚盖, 间棚盖三部分组成。脊瓦棚盖不动,保证
The Sichuan Petroleum Administration Bureau’s equipment storehouse in the Northwestern Sichuan Mining Area has built a 2200m~2 movable storage shed over the past two years and basically solved the problem of storage and lifting of on-site equipment. According to the needs of equipment storage and lifting, the basic structure of the movable storage shed was determined (see figure). 1, left and right wing open type: In order to facilitate the storage of more equipment, vehicles and hoisting, activity storage sheds using the back-to-back placement method, both sides of the lane can be placed equipment, so the Treasury area utilization rate is high. In order to facilitate lifting, columns are set up between the two rows of equipment so that the left and right wings can be raised or lowered, respectively. The middle column will bear the full weight of the shed cover, and can withstand the test of high winds. Therefore, the middle column adopts a double column form with a center distance of 1 meter. The column base is fixed with a floor screw to ensure stability. 2, the shed cover combination: the main shed cover, ridge tile roof cover, shed cover three parts. Ridge tile cover does not move, guarantee