论文部分内容阅读
调整电脑显示器,首先要准备一个测试程序,这里笔者以Nokia Monitor Test 1.0a为例。再依照下述步骤来调整显示器。 一、注意事项 1.如果你的Windows任务栏是设定成“自动隐藏”的话,注意应该暂时取消此功能。 2.不同的显示模式必须分别调整。例如:800×600解析度和1024×768解析度的设定值通常并不会互相影响,质量较好的显示器连不同的荧幕刷新频率都有独立的设定值。 3.显示器最好先热机超过30分钟后再进行调整。 4.更换显示卡或改变显示器的摆放位置、角度后,都需要重新调整。 二、测试调整 启动Nokia Monitor Test后,程序主功能界面有点像电视台测试信号
Adjust the computer monitor, we must first prepare a test program, here I use Nokia Monitor Test 1.0a as an example. Then follow the steps below to adjust the monitor. First, matters needing attention 1. If your Windows taskbar is set to “automatically hide”, then pay attention to should temporarily cancel this feature. 2. Different display modes must be adjusted separately. For example: 800 × 600 resolution and 1024 × 768 resolution settings usually do not affect each other, better quality display with different screen refresh rate has an independent setting value. 3. The monitor is best to heat more than 30 minutes before making adjustments. 4. Replace the display card or change the display position, angle, you need to re-adjust. Second, the test adjustment Start Nokia Monitor Test, the main function of the program interface a bit like a television test signal