论文部分内容阅读
(二) 指板下塌指板下塌,就是指板下端外弧最高处距面板过低,已不足20±1mm。指板下塌后,琴弦与指板间的距离增大,使触弦感觉变硬,对发音及演奏影响很大。因此,一旦发生应及时修整。很多人在处理这一问题时,采取修削或打磨琴马的作法,将琴马高度降低,如此琴音会变得纤细、单薄、尖锐刺耳。这是因为琴马变低后,琴弦对琴马的压力减小,对面板的策动力减弱。为使乐器保持应有的宏亮、浑厚、圆润的音响,并手感舒适,正确的处理办法是把下塌的指板再抬高到标准高
(B) finger board collapse Fingerboard collapse, is the highest point of the outer edge of the fingerboard from the panel is too low, has less than 20 ± 1mm. After the fingerboard collapses, the distance between the strings and the fingerboard increases, making the strings feel harder and have a great effect on pronunciation and performance. Therefore, in time should be timely dressing. When dealing with this issue, many people adopt the practice of cutting or grinding the horse to lower the height of the bridge so that the sound becomes slim, thin and sharp. This is because the lower the bridge, the lower the pressure on the bridge and the weaker the motivation of the panel. In order to keep the instrument as bright, vigorous and mellow as possible and feel comfortable, the correct solution is to lift the fingerboard down to the standard height