基本功能:用于转子小装和泵轴弯曲检测。结构原理:由于离心泵的转子由许多部件组成,而且泵轴细长易弯,转子上其他部件组装中存在累积误差,若三保后直接组装试运很容易使设备发生故障停运,影响生产,若进行转子小装和泵轴弯曲检测,则可避免上述问题。适用范围:应用此支座的平衡原 Basic functions: Used for small rotor and pump shaft bending test. Structure principle: As the rotor of the centrifugal pump is composed of many parts, and the shaft of the pump is long and flexible, there are accumulated errors in assembling the other parts of the rotor. If the assembly and trial run of the three guards are easy to cause the equipment to stop and affect production, If the rotor is small and pump shaft bending test, you can avoid the above problems. Application: The balance of the original use of this support