Degradation of Pollutant and Antibacterial Activity of Waterborne Polyurethane/Doped TiO2 Nanopartic

来源 :武汉理工大学学报(材料科学版)(英文版) | 被引量 : 0次 | 上传用户:superlife123
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
The waterborne polyurethane/doped TiO2 nanoparticle hybrid films were prepared. Nd, I doped TiO2 was prepared with a 50 nm particle sizefi rstly. The hybridfi lm was prepared by mixing doped TiO2 with waterborne polyurethane, followed by heat treatment. The presence and nanometric distribution of doped TiO2 nanoparticles in prepared membranes is evident according to SEM images. The photocatalytic activities of doped TiO2 were signifi cantly enhanced compared with pure TiO2 powders. After the hybridfi lm fabrication, the photocatalytic activities were almost the same as the pure catalysts withkMB of 0.046. In the antibacterial testing, the hybridfi lms can inhibitE. coli growth. A signifi cant decrease in membranefl uidity and increase of permeability ofE. coli were observed.
其他文献
Ultra fast cooling (UFC) processing after hot deformation was conducted on X70 and X80 linepipe steels.Tensile and charpy impact properties of both steels have been investigated in this work.The results have shown that the mechanical properties satisfy al
Cu-Zr-Al- (Y, Ag) amorphous alloy ribbons of Cu50Zr42Al8, Cu46Zr47-xAl7Yx (x=2, 5), Cu43Zr42Al8Ag7, and Cu43Zr42Al8Ag5Y2 were prepared using the single roller melt-spinning method. The glass forming ability and non-isothermal crystallization behavior of t
The carbon nanotubes (CNTs)/ polymethylmethacrylate (PMMA) nanocomposite foams were prepared by the anti-solvent precipitation and supercritical foaming method. The morphology and the electrical conductivity of the foams with different kinds of CNTs were
A hybrid material of carbon microspheres (CMSs) with Ag decoration (Ag/CMSs) was developed. Poly (3-hexylthiophene):Ag/CMSs composite iflm was prepared by spin-coating. Scanning electron microscopy, transmission electron microscopy, Fourier transform infr
High strength,ductility,and superplasticity Mg-6.0%Zn-l.0%Y-0.6%Ce-0.6%Zr (wt%) alloy was prepared by sequentially applying rapid solidification,extrusion,and reciprocating extrusion (REX).The microstructure of the alloy after 2-pass REX consisted of fine
The hydraulic concrete durability under the alternation of freeze-thaw and carbonation has been systematically investigated in this work, where both the micro part and the microscopic characteristics of concrete interface were analyzed based on computed t
Hydration process, crack potential and setting time of concrete grade C30, C40 and C50 were monitored by using a non-contact electrical resistivity apparatus, a novel plastic ring mould and penetration resistance methods, respectively. The results show th
Mesoporous silica-zirconia supported phosphotungstic acid was synthesized by evaporation induced self-assembly method and used as oxidative desulfurization catalysts. The structural properties of as-prepared catalysts were characterized using various anal