论文部分内容阅读
BY12-VI型水中不分散注浆料:主要应用于突水的堵漏,使用时将1000 kg BY12-VI型加入到600 kg水中高速分散剪切乳化15 min,浆液细度小于0.05 mm,初始流动度25s、30 min流动度30 s,然后用压浆泵将浆液压进突水处,当浆体与水接触时不易被水分散掉,随着注浆压力的加大,浆液逐渐把水挤退到半径1~50m以外,水中7d抗压强度大于5 MPa,28 d抗压强度大于10 MPa,28 d抗渗强度大于P12。BY12-IA型早凝早强高强注浆料:与BY12-VI型配合主要应用于突水的堵漏和抢修,使用时将1000 kg
BY12-VI non-dispersed water grouting material: mainly used in water inrush plugging, when used to 1000 kg BY12-VI type added to 600 kg of water high speed dispersion shear emulsification 15 min, slurry fineness of less than 0.05 mm, initial The flowability of 25s, 30min flow 30s, and then pressure grouting pump into the water inrush, when the slurry in contact with water is not easy to be dispersed by water, with the grouting pressure increases, the slurry gradually water Rejected to the radius of 1 ~ 50m outside, the water 7d compressive strength greater than 5 MPa, 28 d compressive strength greater than 10 MPa, 28 d anti-seepage strength greater than P12. BY12-IA-type early-setting early strength and high-strength grouting material: with the BY12-VI type is mainly used in water inrush and repair, when used 1000 kg