推力滚珠轴承主要是由弹子、弹仓、弹盖三部份组成。一般易损坏弹仓和弹盖,因此在修复中可利用原有弹子,仅换弹仓、弹盖即可。弹仓的制法,是采用低炭钢或铜料,车成圆圈,并在圆圈上分别钻孔,孔径应较弹子直径约大0.5毫米,然后装上弹子,用冲子在孔的四周冲一下,使孔 Thrust ball bearings are mainly marbles, magazine, cover three parts. Generally easy to damage the magazine and cover, so the repair can use the original marbles, only for the magazine, cover can be. The system is made of low carbon steel or copper material, the car into a circle, and were drilled in the circle, the diameter should be about 0.5 mm larger than the diameter of the ball, and then loaded with a marbles, punches around the hole in the punch Look, make hole