【摘 要】
:
Fluidization of non-spherical particles is very common in petroleum engineering.Understanding the complex phenomenon of non-spherical particle flow is of great significance.In this paper,coupled with two-fluid model,the drag coefficient correlation based
【机 构】
:
School of Energy Science and Engineering, Harbin Institute of Technology, Harbin 150001, China;Heilo
论文部分内容阅读
Fluidization of non-spherical particles is very common in petroleum engineering.Understanding the complex phenomenon of non-spherical particle flow is of great significance.In this paper,coupled with two-fluid model,the drag coefficient correlation based on artificial neural network was applied in the simulations of a bubbling fluidized bed filled with non-spherical particles.The simulation results were compared with the experimental data from the literature.Good agreement between the experimental data and the simulation results reveals that the modified drag model can accurately capture the interaction between the gas phase and solid phase.Then,several cases of different particles,including tetrahedron,cube,and sphere,together with the nylon beads used in the model validation,were employed in the simulations to study the effect of particle shape on the flow behaviors in the bubbling fluidized bed.Particle shape affects the hydrodynamics of non-spherical particles mainly on microscale.This work can be a basis and reference for the utilization of artificial neural network in the investigation of drag coefficient correlation in the dense gas-solid two-phase flow.Moreover,the proposed drag coefficient correlation provides one more option when investigating the hydrodynamics of non-spherical particles in the gas-solid fluidized bed.
其他文献
In order to analyze and compare the differences in pore structures between shale gas and shale oil formations,a few samples from the Longmaxi and Bakken Formations were collected and studied using X-ray diffraction,LECO TOC measurement,gas adsorption and
Although low salinity water injection (LSWI) has recovered residual oil after the conventional waterflood,highly viscous oil has remained in heavy oil reservoirs.Hot water injection is an economic and practical method to improve oil mobility for viscous o
The drainage areas (and volumes) near hydraulically fractured wells,computed and visualized in our study at high resolution,may be critically affected by the presence of natural fractures.Using a recently developed algorithm based on complex analysis meth
In the present research work,a non-edible oil source Cucumis melo var.agrestis (wild melon) was systematically identified and studied for biodiesel production and its characterization.The extracted oil was 29.1% of total dry seed weight.The free fatty aci
Biodiesel is one of the most popular prospective alternative fuels and can be obtained from a variety of sources.Waste frying oil is one such source along with the various raw vegetable oils.However,some specific technical treatments are required to impro
In order to avoid mistakes and to save a great deal of time in analysis,an innovative methodology was developed that can analyze the well operations and rig characteristics involved to define the best emergency disconnect sequence (EDS)available.A solutio
It is of real and direct significance for China to cope with oil price fluctuations and ensure oil security.This paper aims to quantitatively analyze the specific contribution ratios of the complex factors influencing international crude oil prices and to
In the pharmaceutical industry,fluidized beds are typically used for pellets drying,coating and granulation.The gas-solids flow characteristic in the process plays an important role to control the heat and mass transfer as well as the end-point product qu
Ensemble-based analyses are useful to compare equiprobable scenarios of the reservoir models.However,they require a large suite of reservoir models to cover high uncertainty in heterogeneous and complex reservoir models.For stable convergence in ensemble
Full tensor magnetic gradient measurements are available nowadays.These are essential for determining magnetization parameters in deep layers.Using full or partial tensor magnetic gradient measurements to determine the subsurface properties,e.g.,magnetic