论文部分内容阅读
长型研磨机是我厂在技术革新运动中设计制造的水磨石加工设备,分12磨头和14磨头两种,用碳化硅磨料或人造金钢石磨料对产品进行研磨加工。一般由粗细不同的四种磨料配合使用,由粗到细为120# 、M28、M10、M5,分别粘结到磨盘上。全机液压传动无极调速,研磨运动轨迹为液压仿形,由电、液按程序控制,从入料到出料形成自动循环。该机适用于305×305毫米定型规格的水磨石、大理石板材的细磨加工,研磨后表面光洁度不低于7级,设计生产能力为300块/小时左右。该机投产后代替了手扶研磨机。
Long grinding machine is our factory in the technological innovation movement design and manufacture of terrazzo processing equipment, divided into 12 grinding head and 14 grinding head two, with silicon carbide abrasive or synthetic diamond abrasive grinding of the product processing. Generally used by the different thickness of the four kinds of abrasive, from coarse to fine 120 #, M28, M10, M5, respectively, bonded to the disc. The whole hydraulic stepless speed control, grinding motion trajectory for hydraulic profiling, by electricity, liquid according to the program control, from the material to the material to form an automatic cycle. This machine is suitable for the fine grinding of terrazzo and marble plates with the specification of 305 × 305 mm. The surface finish after grinding is not less than 7 and the designed production capacity is about 300 blocks / hour. The machine replaced the handheld grinding machine after it was put into production.