论文部分内容阅读
1959年到1966年,北京曾在4～5层居住建筑中采用振动砖壁板作承重内墙、内纵墙和部分隔墙,厚度包括面层为14厘米,尺寸为每间两块(或一块)。在建筑物旁塔吊工作半径以内就地重叠生产(见图1)。一、生产台座的布置 1.设计布置生产壁板的台座,必须先将现场情况测量准确。包括地形、道路、管沟、障碍物的位置、备出口的位置及本栋和相邻栋号土方工程情况。
From 1959 to 1966, Beijing used vibrating brick siding as the load-bearing inner wall, inner vertical wall, and part of the partition wall in residential buildings of 4 to 5 floors. The thickness included 14 cm of surface layer and the size was two per room (or piece). Overlapping production occurs within the working radius of the tower crane next to the building (see Figure 1). First, the production of the pedestal layout 1. Design and layout of the production of pedestal pedestal, must first accurately measure the situation at the scene. Including the location of terrain, roads, trenches, obstacles, the location of the prepared exits, and the earthworks of this ridge and neighboring buildings.