High efficiency organic light-emitting diodes using CuOx/Cu dual buffer layers

来源 :OptoelectronicsLetters | 被引量 : 0次 | 上传用户:arnohuang123
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
An organic light-emitting diode (OLED) device with high efficiency and brightness is fabricated by inserting CuOx/Cu dual inorganic buffer layers between indium-tin-oxide (ITO) and hole-transport layer (HTL). The CuOx/Cu buffer layer limits the operating current density obviously, while the brightness and efficiency are both enhanced greatly. The highest brightness of the optimized device is achieved to be 14 000 cd/m2at current efficiency of 3 cd/A and bias voltage of 15 V, which is about 50% higher than that of the compared device without CuOx/Cu buffer layer. The highest efficiency is achieved to be 5.9 cd/A at 11.6 V with 3 400 cd/m2, which is almost twice as high as that of the compared device.
其他文献
期刊
期刊
为实现高速铁路周界侵限检测系统自动识别轨道区域的功能,提出了一种自适应的图像分割与识别算法。计算了每个场景的直线特征极大值以调节自适应参数,提出了新的基于边界点权重及区域面积的聚类组合规则,将碎片化区域快速组合成局部区域;简化了卷积神经网络,通过对卷积核进行预训练并在损失函数中增加稀疏项来提高特征图的差异性。在不使用显卡的前提下,对比实验结果表明所提算法的像素准确率最高(95.9%),计算时间最短
A new method for simultaneously determining the size and refractive index of epithelial cell nuclei is presented. The function of the modified elastic light scattering spectrum is regarded as a function of wave number factor, Q=2\lambda
A simple capillary-based extrinsic Fabry–Perot structure is presented and fabricated, using the manual welding method with the strain sensing characteristics investigated in detail. Strain sensitivities of 4.2, 2.8, and
红外实时人体目标检测因无需主动光源、易于去除环境干扰等优点成为近年来人工智能领域的一个研究热点。当前主流实时红外嵌入式图像采集处理方式因图像传输、接口速度、工程量等技术局限,制约了红外人体目标检测的便捷实现和实时利用。针对传统嵌入式处理器难以同时采集和处理红外数据这一影响红外人体目标检测实时性的技术问题,研究了基于ZYNQ异构多核处理器的实时检测技术。采用FPGA+多核ARM架构,由FPGA端实现
High-resolution lens-coupled indirect X-ray scintillator imagers are required by many imaging applications. However, the severe weakening of image details prevents its further performance improvement. Through our research, this image degradation is attrib
期刊
Micro-optic elements have been fabricated in silica and soda-lime glass with femtosecond laser pulses. The dependence of refractive index change on pulse duration, pulse energy and scan passes is investigated and a Fresnel zone plate is induced. A permane
高精度KDP晶体是惯性约束核聚变光路系统中的重要元件,而已加工表面的小尺度波纹对光学元件的透射比有着重要影响。采用傅里叶模方法理论分析了表面小尺度波纹的幅值及周期对KDP光学元件透射比的影响。研究结果表明,当小尺度波纹幅值小于100 nm时,透射比随波纹幅值的增加基本呈线性增长,波纹幅值每提高10 nm,透射比可提高近0.5%;透射比随着小尺度波纹周期的增加围绕中心透射比上下浮动,透射比振幅基本保持不变,且中心透射比及透射比振幅均随着小尺度波纹幅值的增加而增大;小尺度波纹周期在10.5-12 μm区间内时
具体给出了含可饱和吸收体的单模驻波激光系统的哈密顿(Hamiltonian)量和序参量运动方程,并对序参量的定态解做了线性稳定性分析。结果表明,驻波系统在阈值附近的定态行为(非平衡相变行为、双稳行为、临界点附近的指数行为等)与行波系统定性类似,但具体细节有异。特别不同于行波的是,驻波情形下三个定态解中的I_分支有可能实现。