论文部分内容阅读
一、开槽五个程序及注意事项一是隔膜架的组装、调试、下槽,组装隔膜架非常重要,如果隔膜架组装不好将对后序的电积操作造成一定影响,因此在组装中要严密细致。极间距135毫米是指阴极与阴极之间或阳极与阳极之间的间距为135毫米,在组装过程中要精确计算出隔膜架单架的总长,保证每个极间距均在135毫米。二是隔膜架下槽必须调节垂直度,上下偏差不能大于2毫米,隔膜架必须固定结实,以防下阳极时,造成隔膜
First, the slotting five procedures and precautions First, the diaphragm frame assembly, commissioning, the next slot, the assembly of the diaphragm holder is very important, if the diaphragm holder assembly is not good will be after the operation of the electric volume caused some impact, so in the assembly To be careful and meticulous. Pitch 135 mm means the distance between the cathode and the cathode or between the anode and the anode is 135 mm. During the assembly process, the total length of the single frame of the diaphragm holder must be precisely calculated to ensure that each electrode pitch is 135 mm. Second, the diaphragm must be adjusted under the tank verticality, up and down deviation can not be greater than 2 mm, diaphragm holder must be solid, to prevent the next anode, resulting in diaphragm