论文部分内容阅读
除了“1985ATC110型”和“ATC125型”之外,其它各种型号的本田摩托车都需要调整、检查传动链的张紧度。首次使用一周后以及在此之后,每使用30天即应检查一次。检查传动链张力,是在发动机常温、怠速运行的条件下进行的。把锁止螺母和定位螺钉放松旋转1(1/2)转,这样就放松了张紧轮推杆。如果此时传动链的声响减小,则旋紧定位螺钉,并用锁止螺母固定。如果传动链声响不变,则保持定位螺钉在放松状态。取下张紧轮座盖,并且慢慢地向里旋入张紧轮
In addition to “1985ATC110 type” and “ATC125 type”, the other types of Honda motorcycles need to be adjusted to check the tension of the drive chain. After the first use of a week and after that, every 30 days should be checked once. Check the transmission chain tension, is the engine room temperature, idling conditions. Loosen the locknut and set screw 1 (1/2) turn, thus loosening the tensioner pushrod. If the sound of the drive chain decreases at this point, tighten the set screw and lock it with the lock nut. If the drive chain sound does not change, then hold the set screw in a relaxed state. Remove the tensioner cover and slowly screw in the tensioning wheel