我厂現阶段生产的产品大多数是筒形机体,在焊接方面环形焊縫較多,因此对于焊接自动轉胎的要求非常迫切。通过一系列的研究,利用小平車的四个車輪(連軸和軸承座等),分别焊在旧废的工字鋼架子上。傳动机构是利用一台土机床作为变速机构(变速比是940/29.5),通过一道皮带过桥,再带动一台起重用的手搖 Most of the products produced by our factory at this stage are cylindrical bodies, and there are many torus welds in welding, so the requirements for automatic tire welding are very urgent. Through a series of studies, the four wheels of Kohei Koji (connecting shafts and housings, etc.) are respectively welded on the old scrapped I-beam shelves. Transmission is the use of a soil machine as a variable speed mechanism (speed ratio is 940 / 29.5), through a belt bridge, and then bring a lifting hand crank