论文部分内容阅读
我厂使用的日本进口的φ1mmCO_2焊丝,因焊丝盘与我厂的不同,不能直接用于生产,每次都要倒到我厂的焊丝盘上。由于盘子太小,不能整盘倒入,增加了更多的麻烦。为此根据进口焊丝盘的轴孔直径(φ53mm)用铝合金制作了一个带轴盖的轴套,先套入原先使用的固定焊丝盘的φ15mm的轴上,将焊丝盘固定在轴套上,加上轴套盖,最后将轴上的活动销旋转90°推出。因里口加了一个弹簧,送丝过程自如。停送丝时,还有一定的自锁能
I use the factory in Japan φ1mmCO_2 imported wire, welding wire and my factory because of different, can not be directly used in the production, each time I have to pour into the factory wire plate. Because the plate is too small, can not be poured into the whole plate, adding more trouble. For this purpose, a sleeve with shaft cover is made of aluminum alloy according to the shaft hole diameter (φ53mm) of the imported wire plate, and then the sleeve is fixed to the φ15mm shaft of the originally used fixed wire plate, the wire plate is fixed on the sleeve, Coupled with the sleeve cover, and finally the axis of the pin rotated 90 ° launch. Due to the addition of a spring mouth, wire feeding process freely. Stop wire, there is a certain self-locking energy