[中国石化新闻网]“平姐,快看,今天的新催化烟气硫含量只有110毫克/立方米,我们的小改造效果真是立竿见影。”近日,茂名石化炼油分部联合五车间设备员小杨指着新催化装置烟气硫化物检测结果报告单兴奋地说。原来,新催化装置自去年底开工投产以来,由于设计时与烟气脱硫脱销装置作为一体,因而没有设计硫转移加料设施。但目前新催化开工后,烟气脱硫脱销装置没有与其同步开工,造成新催化烟气中硫化物含量超高,最高时达到了600毫克/立方米。装置生产过程中产 [Sinopec News] “Ping Jie, look, today’s new catalytic sulfur content of flue gas is only 110 mg / cubic meter, the effect of our small transformation is really immediate. ” Recently, Maoming Petrochemical Refining Division joint five workshop equipment Xiao Yang pointing to the new catalytic converter flue gas sulfide test results report single excited to say. It turned out that since the new catalytic converter has been put into operation since the end of last year, it has not designed a sulfur transfer charging facility because of its design integration with flue gas desulfurization and elimination devices. However, at present, after the new catalyst is started, the flue gas desulfurization and elimination device has not been started simultaneously with it, resulting in an excessively high sulfide content in the newly catalyzed flue gas, reaching a maximum of 600 mg / m3. Equipment production process in production