电机机座由于结构复杂、壁薄,系易损铸件。应放在清理转台或清理室内清理。由于我厂目前还不具备这个条件,为此设计制作了 Q3110型抛丸清理滚筒。用于清理 Y80～Y180电机机座。该装置经过一年多生产实践应用,证实效果十分理想。清理一台机座一般约13分钟,机座内外腔清理均匀。一、结构设计和技术参数选择 Motor base due to the complex structure, thin wall, easy to damage the Department of castings. Should be placed on the turntable cleaning or clean-up indoor cleaning. Because I plant does not yet have this condition, for this reason designed and manufactured Q3110 shot blasting drum. Used to clean Y80 ~ Y180 motor base. The device after more than a year of practical application of production, the results proved to be very satisfactory. Cleaning a machine is generally about 13 minutes, the seat inside and outside the cavity clean evenly. First, the structural design and technical parameters of choice