我厂一车间革新组根据生产需要,将1318型六角车床改装成全自动车床,机床外观见图1。一、改装部分改装后传动系统如图2所示。 1.去掉原机床上十字手轮六角盘。 2.床身后边增加一根分配轴,其上装有送料凸轮、松开夹紧凸轮、尾刀架凸轮、进退刀凸轮及退料凸轮。 I plant a workshop innovation group according to production needs, the 1318 hexagonal lathe converted into fully automatic lathe, the appearance of the machine shown in Figure 1. First, the modified part of the modified transmission system shown in Figure 2. 1. Remove the original machine cross hand wheel hexagonal plate. 2. Add an additional shaft behind the bed, which is equipped with a feed cam, release the clamping cam, the tail knife cam, advance and retreat the knife cam and the retraction cam.