论文部分内容阅读
10×1600型四辊弯板机已由上海市机械制造工艺研究所制造成功。该机基本参数符合标准,结构设计合理,使用性能良好。全机采用钢板焊接结构。主辊由主电机经减速箱独立驱动,下辊及侧辊各有独立的调整电机,能作平行及倾斜调整。上辊可由专用电机驱动倾倒。采用控制台按钮操作,使用方便,外形美观。在常温状态下,本机能将金属板一次卷制成圆柱形、弧形和一定范围内的圆锥形工件。弯卷工件时,板材两端不需预先弯头。最大弯卷板料厚度(σs=27公斤/毫米~2)10毫米,最大弯卷板料宽度1600毫米。该机是锅炉、造
10 × 1600-type four-roll plate bending machine has been manufactured by the Shanghai Institute of Machinery Manufacturing success. The basic parameters of the aircraft meet the standards, structural design is reasonable, the use of good performance. The whole machine adopts steel welded structure. The main roller is driven independently by the main motor via a reduction gearbox. Each of the lower roller and the side roller has its own independent adjustment motor, which can be adjusted in parallel and in tilt. The upper roller can be driven by a dedicated motor to dump. Using the console button operation, easy to use, beautiful appearance. At normal temperature, the machine can once roll into a metal plate cylindrical, arc and cone within a certain range of the workpiece. Bending the workpiece, the plate ends without pre-bending. The maximum bending plate thickness (σs = 27 kg / mm ~ 2) 10 mm, the maximum bending plate width 1600 mm. This machine is a boiler, made