论文部分内容阅读
带锯条系用碳素钢材经过压延制成薄钢带,淬火后研磨为平滑的表面而成。使用时根据带锯机上下两个锯轮的距离截成适宜的长度,并将两端焊接在一起成环状,然后将其一边开出锯齿,锯身给予适当的圆势、弯势。锯齿磨出锋头后,套挂在带锯机上下两个锯轮上,锯轮高速回转时,锯条也随着转动,于是锯齿迂回的切削木材。一、带锯条的成分为了使锯条耐磨损,不因切削冲击而产生裂纹,故必须具有适当的硬度和弹性。钢质过软,切削木材时既容易磨损,又容易弯曲,不堪使用;钢质过硬,则太脆,容易折齿及产生裂纹。因此,锯的钢质既要强韧又要有弹性,
Band saw blade made of carbon steel after rolling into a thin strip of steel, hardened and smoothed into a smooth surface. When used according to the sawing machine up and down the distance between the two sawdust cut into the appropriate length, and the ends are welded together into a ring, and then one side of the sawtooth, body to give the appropriate circular potential, bending potential. Saw tooth grinding out of the front, the sets of hanging band saw machine up and down the two saw wheels, saw wheel rotation speed, the saw blade also with the rotation, serrated circuitous cutting wood. First, the band saw blade composition In order to make the saw blade wear-resistant, not because of the impact of cutting cracks, it must have the appropriate hardness and flexibility. Steel is too soft, cutting wood is not only easy to wear, but also easy to bend, unbearable use; excellent steel, it is too crisp, easy to fold teeth and cracks. Therefore, the sawing steel is both tough and flexible,