论文部分内容阅读
根据生产需要,我们将 W-50_2~1型履带式挖掘机,改装成了轨道式(标准轨距)挖掘机。经过实际生产试验,该机使用效能基本良好。现将各部件改装情况简介如下,供有关单位参考。一、用途:改装成的轨道式挖掘机,可自动行驶在标准轨距轧道上,做各种挖掘、采剥、装卸、打桩及牵引等工作。如:安装起重钩,可牵引载轧车辆铺设铁路。以及在大、中、小型露天矿运输铁路上作移道之用(图1)。安装拉铲可做各种土方的移运工作;可自行牵引车辆爬上千分之十二的坡度。适用于
According to production needs, we have converted W-50_2~1 crawler excavators into orbital (standard gauge) excavators. After actual production test, the use efficiency of this machine is basically good. The brief introduction of the modification of various components is as follows for the reference of relevant units. 1. Usage: The track-type excavator converted into a track can be automatically driven on a standard gauge rolling track to perform various tasks such as excavation, mining, loading, unloading, piling and traction. Such as: installation of lifting hooks, can be hauled to rolling vehicles to lay the railway. And for the use of large-, medium- and small-scale open-pit mines for the purpose of moving lanes (Figure 1). The installation of pull shovels can be used for various earthmoving operations; it is possible to tow vehicles to climb up to a slope of 12%. Apply to