液体燃料射流破碎机理研究中的时间模式与空间模式

来源 :内燃机学报 | 被引量 : 0次 | 上传用户:ychhome
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
利用线性不稳定性理论分析了液体燃料射流在分别采用时间模式与空间模式两种方法下液体表面扰动波的波数、频率及最大扰动增长率之间的关系,讨论了两种模式下液体射流结构特征的差别。应用基于粘性液体射流射入气体介质中的物理模型,计算分析了 Re 数、 We 数和密度比 Q对时间模式与空间模式差值的影响,结果发现采用时间模式或空间模式并不改变液体射流各阶模式之间的相互关系, We 数和 Q是影响时间模式与空间模式差值的主要因素,而 Re 数影响不大。在一定条件下,时间模式与空间模式具有等效性。 Based on the linear instability theory, the relationship between the wave number, frequency and maximum disturbance growth rate of liquid fuel jets under two methods of time mode and space mode are respectively analyzed. The effects of liquid jets structure Differences in characteristics. The effects of Re number, We number and density ratio Q on the difference between time mode and space mode were calculated and analyzed based on the physical model of viscous liquid jets injected into the gas medium. The results showed that the time mode or space mode did not change the liquid jet The correlation between the order modes, We number and Q are the main factors that affect the difference between the time mode and the spatial model, while the Re number has little effect. Under certain conditions, time mode and space mode are equivalent.
其他文献
The title compound (Ag2F6O4N8C12H16, Mr = 666.07) was synthesized and its crystal structure was determined by single-crystal X-ray diffraction method. It crysta
探讨 了在无机 合成中 引入 微 波加 热方 式, 利用 微 波辐 射制 备 结 晶 γ Al2 O3 . 微 波 条 件下所制备 的结晶 Al( O H) 3·x H2 O, 经55 0 ℃ 焙烧 后 所得 的 γ Al2 O3( M) 与 用通 常碱
研究了金刚石薄膜在 W C6 % Co 硬质合金、金属 W 和单晶 Si 片上的成核特点。实验结果表明,金刚石薄膜在上述衬底材料上的成核特点和成核机制不同。用于衬底研磨预处理的金刚石微粉
With the phenomenological A-nucleus potentials of Woods-Saxon shape,the effects of the maas-number dependence of the shrinkage,the effective mass m*^ and the ch
以稀土络合体系RE(P204)3-Al[CH2CH(CH3)2]3(RE=Y,Nd,Pr,Sm,Dy,Eu);P204=(RO)2POO-,R=CH3(CH2)3CH(C2H5)CH2-催化二氧化碳(CO2)与环氧氯丙烷(ECH)无规共聚/,合成高分子量的新
研究了具有磁铅矿和β-Al2O3结构的多铝酸盐基质中希土离子取代对Eu2+发光的影响。结果表明希土离子取代对Eu2+的发射峰位置和强度产生了较大变化,特别在磁铅矿基质中,这种影响更为显著。通过
利用液氮制冷技术实现低温靶及气体样品液化,并通过二级轻气炮加载进行液态气体0~60GPa的冲击压缩实验.较详细地讨论了制冷系统与样品靶、靶室内外各环节之间可靠的低温真空连
用维氏微硬度测定仪和DSC对超高压处理的HDPE进行了研究.发现随着处理压力(pc)的增大,HDPE的微硬度(Hv)提高,在处理时升高温度(Tc),更有利于Hv的提高.当pc=4.0 GPa、Tc=1
采用快速混合停流技术 ,在实际反应条件下 ,考察了不同铁卟啉配合物FeⅢ(Por.)Cl(Por.=TPP、TMOPP和TFPP)与单氧给体过氧苯甲酸m CPBA构建的模拟酶体系中催化活性物种的生成
采用泡生法和提拉法生长出三硼酸铯( 化学式 Cs B3 O5 ,简称 C B O) 晶体,研究了晶体生长工艺条件及晶体生长形态。泡生法生长的 C B O 晶体的尺寸为40m m ×25mm ×25m m ;生长过程中晶体转速为10 ~20r/min ,降温速率