本文探讨了计算机机房的日常维修维护工作中,首先要对软件进行维护,在排除软件故障后再进行硬件检修。如先要清理干净机箱内的灰尘,然后先外设后主机,先电源后部件,先简单后繁杂,用观察法查看各部件是否有烧毁痕迹;电解电容是否有鼓包爆浆的现象;用触摸法检查是否有芯片过热烫手现象,如果有,则换上同型号的零件焊接牢靠即可等一系列方法。 This article explores the daily maintenance of computer room maintenance work, first of all to maintain the software, software troubleshooting and troubleshooting hardware. If you want to clean the dust inside the chassis first, and then the host after the first peripherals, the first power after the parts, the first simple and complicated, with the observation method to see if there are signs of burning parts; Electrolytic capacitor burst drum phenomenon; touch France check whether there is a hot chip phenomenon, if there is, then put on the same type of parts can be welded firmly to wait a series of methods.